Columns
We offer a wide selection of classic columns from the simplicity of a plain Doric column through to fluted columns with Ionic heads. There are also square columns for the more modern taste.
All columns can be supplied with complimentary half columns.
Split columns can be supplied where structural steelwork is already in place.
|
Doric Columns G5A (Plain) and G5C (Fluted)
Maximum Height: 2425 mm
Plinth: 380 mm square
Plinth Height: 200 mm **
Column shaft dia tapers from 275 to 220 mm
For aditional height, use
G5APL (Plain) and G5CPL (Fluted)
These are the same columns but with an extended plinth
Maximum Height: 2750 mm
Plinth: 380 mm square
Plinth Height: 535 mm **
Column shaft dia tapers from 275 to 220 mm
** This allows you to cut on site to suit your exact height.
Drawing No. C2023/11/A
|
|
|
Ionic Columns G5B (Plain) and G5D (Fluted)
Maximum Height: 2375 mm
Plinth: 380 mm square
Plinth Height: 200 mm **
Column shaft dia tapers from 275 to 220 mm
For aditional height, use
G5BPL (Plain) and G5DPL (Fluted)
These are the same columns but with an extended plinth
Maximum Height: 2700 mm
Plinth: 380 mm square
Plinth Height: 535 mm **
Column shaft dia tapers from 275 to 220 mm
** This allows you to cut on site to suit your exact height.
Drawing No. C2023/11/B
|
|
|
Doric Columns G5E (Plain) and G5G (Fluted)
Maximum Height: 2565 mm
Plinth: 340 mm square
Plinth Height: 120 mm
Column shaft dia tapers from 225 to 175 mm
Drawing No. C2023/11/E
|
|
|
Ionic Columns G5F (Plain) and G5H (Fluted)
Maximum Height: 2565 mm
Plinth: 340 mm square
Plinth Height: 120 mm
Column shaft dia tapers from 225 to 175 mm
Drawing No. C2023/11/F
|
|
|
Columns G5J (Doric) and G5K (Ionic)
Maximum Height: 2775 or 2720 mm
Plinth: 305 mm square
Plinth Height: 150 mm
Column shaft dia tapers from 225 to 175 mm
Drawing No. C2023/11/J
|
|
|
Square Columns SQ1 (Plain) and SQ2 (Fluted)
Maximum Height: 2310 or 2250 mm
Plinth: 220 mm square
Plinth Height: varies
Column shaft 180 mm
Drawing No. C2023/11/S
|
|