You are here: Home » Products » Canopies » Curved Roof Canopies

Curved Roof Canopies or FC Canopies

Curved ‘lead’ effect or FC Canopies come a variety of widths, projections, roof heights and can sit on an equally wide variety of fascia/soffits. They can hang directly off the wall, with or without decorative brackets.  These canopies can be adapted for use as bay roofs.  Some have been designed to be both covering the front entrance and a habitable space in one long canopy/ bay.

 

In the following pages we will try to show you some options and combinations but do let your imagination run wild as we can probably meet your specific need from our existing mould tools.

 

We suggest you have a look at the Bays pages for more examples of what we can do.

 

 


 

Balconette Canopy for a 'Juliette' balcony FC03

A useful feature to decorate a Juliette.

 


 

Curved Canopy "Bembridge"

Overall width 1500 mm

Overall projection 500 mm

Soffit width 1200 mm

Soffit projection 450 mm.

 

Drawing No.  C90303-01 (JPG Standards)

 

Click here for the drawing.

 

 

Back to the Top


 

Curved Canopy "Bembridge Large"

This is a much larger version of the small Bembridge above and would normally be used over a bin store at one end, for example, and a post at the other end. It's projection is too big to be cantilevefred from the wall.

 

Overall width 3700 mm

Overall projection 1150

Soffit width 3400 mm

Soffit projection 1000 mm.

 

Drawing No.  90303-02 (38-1)


 

Curved Roof Canopy 'Ascot'

This canopy is self supporting and can be decorated with the complementary brackets. The photo shows a gutter attached as well if desired.

 

Overall width 2310 mm

Overall projection 750 mm

Soffit width 2200 mm

Soffit projection 700 mm.

 

Drawing No.  30701-11 (47)

 

 

 

Click here for the drawing.

 

 

Back to Products Quick Links

 

Back to the Top

 

 

 


 

FC Canopy Range FC1 & FC8

The FC range comprise the FC1, FC8, FC12 and FC15. The widths and projections are shown below. The photo shows an FC8 with a G8S fascia/soffit and 2370 decorative brackets. 

 

FC1 Roof Width 1530 mm, Projection 845 mm

FC8 Roof Width 2190 mm, Projection 845 mm

 

Both these have a roof height from the base of the soffit to the top of the upstand of 950 mm.  

 

Drawing No.  C2023/FC/1 (JPG)

 

 

 


 

FC Canopy Range FC12 & FC15

The FC range comprise the FC1, FC8, FC12 and FC15. The widths and projections are shown below. The photo shows an extended FC with a G8S fascia/soffit sitting over back to back binstores. 

 

FC12 Roof Width 2400 mm, Projection 1000 mm

FC15 Roof Width 3000 mm, Projection 1000 mm

 

Both these have a roof height from the base of the soffit to the top of the upstand at 950 mm.  

 

Drawing No.  C2023/FC/2 (JPG)


 

FC Canopy Range Extended Length

The FC range can continue to be expanded. 

 

Projection 845 mm; Roof Width 4900 mm.

Roof height from the base of the soffit to the top of the upstand at 785 mm.  

 

Drawing No.  9809-03 (35)

 

 

 

 

Click here to see the drawing.

 

 

 

 

Back to the Top

Please contact us at http://www.productionglassfibre.co.uk/

Production Glassfibre Limited at Kirkcaldy, Fife 01592 650444 or Wilstead Bedfordshire 01234 741 444 or Accrington Lancs 01282 680 444